Hold the "Ctrl" key down. Press "+" (plus) to zoom in or "-" (minus) to zoom out.


Follow Me Print is the name of the print service at UiS. You can use this both when you print from UiS computers and your laptop.

Enabling Follow Me Print

To start using the printers at UiS you must do the following:

  • You can activate your student ID card so that you can use the card to log in to a printer.
  • Activate your card by holding the student card over the card reader until you hear a beep.
  • Enter your student number and password. Your account is now ready.

NB: Enter your password exactly as you created it when you activated your student account. If you have + or - in your password you must change your password here:

If you do not have a student card you can get this at the Service Center in Arne Rettedals hus, ground floor.

How to Print

  1. Send your print job to PrintUFRII from any UiS computer or your personal laptop.
  2. Log in to any student printer on campus with your student card.
  3. Select the job you want to print in the printer display.
  4. Select Print+Delete to print. The cost will be deducted from you printer account.

How to copy / scan

  1. Log in to any student printer on campus with your student card.
  2. Select "copy" or "scan and send".
  3. Select settings (color, drawer, etc.) for copying or scanning.
  4. Press the Start button.

Color printing and one sided printing

  1. Choose Print.
  2. Choose printer settings (Skriveregenskaper)
  3. Choose Color Mode and 1-sided/2-sided printing as required.

IMPORTANT: Notice about color printing:
Do not send multi-page print jobs before testing color quality first!
Print a couple of color pages first to ensure the color quality is as you expect.
For the most part quality should be good enough - but if you need higher quality please contact the IT-Servicedesk.